DTB 07 - 7,000lb GVWR Dump Trailer
DTB 10 - 9,990lb GVWR Dump Trailer
Iron Bull - A New Breed of Dump Trailers
Iron Bull DTB10 trailers are proof that great things can come in small packages. Top tier components come together with the most rugged construction on the market to deliver a dump trailer like no other. Dexter Nev-R-Adjust brake axles and radial tires provide a solid foundation for each Iron Bull dump trailer and ample grip for stopping power. Sherwin-Williams Powdurda Powder coat gives each trailer a rugged finish with a showroom shine. Hydraulic cylinders are the muscle for each Iron Bull dump trailer and KTI remote operated hydraulic pumps feed the beast. USA made, lifetime LEDs are provided by TecNic lighting and all units are powered by an Interstate deep cycle battery. Each Iron Bull Trailer also comes equipped with a standard tarp kit, stake pockets, locking pump box, 5 position adjustable coupler, multi-function gate and 110v wall outlet charging receptacle for your battery. Our 60" wide 7k bumper pull may be small, but it is full of might. With two 3500lb Dexter Axles and tons of standard features, this model is a great additon to any job site or home.
Jon J.
Tahoe City, CA - 11/13/20
The battery compartment has hydraulic fluid in it after one lift. Welder's slab in many areas, especially blatant on the two ramps. The tongue is bent and can not be used in the lowest position. Logos are put on crooked. Where is the pride in craftsmanship?
Jeffrey S.
Coupeville, WA - 2/6/21
We have a small hobby farm in western Washington. We've made our old converted utility trailer work for the past two years, but with the beginning of a large DIY home renovation and multiple landscape projects looming, it was time for something more. There was no other choice than Iron Bull. We wanted the 6x12 not only to maximize the material we could haul, but also so that we could transport our compact John Deere tractor. A home run!
Jeremiah R.
Colfax, WA - 2/5/21
We were simply tired of unloading stuff from a trailer by hand. We did a ton of research and found Iron Bull and their warranty were at the top of the industry. We looked at dozens of models before settling on Iron Bull due to the heavier duty manufacturing practices. It is brand new so time will tell how it holds up.
Additional Photos
Details
Available Sizes |
|||||
Length |
Width |
Deck Height |
Depth |
Cu yards |
Weight* |
10' |
60" |
31" |
18" |
2.75 |
2450 |
- 6” x 12lbs I-Beam Frame
- 2 5/16” Adjustable Coupler
- Formed 3 x 3/16” Channel Crossmembers
- Full Length Bed Runners and Ramp Pockets
- 10 Gauge 18” or 24” Steel Sides
- One-Piece 7 Gauge Steel Flooring
- Weld On Diamond Plate Fenders
- Locking Pump Box
- 10k Drop-Leg Jack
- Cambered Dexter Nevr-R-Adjust Brake Axles
- Multi-leaf Slipper Spring Suspension
- E-Z Lube Hubs
- Radial Tires
- Standard Stake Pockets
- Spare Tire Mount (Weld On)
- Three-Way Gate
- Powdura Powder Coat
- Scissor Hoist
- 4 Standard 3” D-Rings
- Flow Control Valve
- Lifetime LED Lighting
- Double Acting Power Unit
- 5”x16” Hydraulic Cylinder
- All Lighting DOT Approved
- Standard Retractable Tarp Kit
- Molded Sealed Harness with Resistors
- LED Voltage Indicater in Remote
- Built-In 5 amp Battery Charger
- Interstate Deep Cycle Batteries
- 7-Way Receiver Female Plug with Adapter
- Rear Support Stands
- Butterfly Tool Box
- Side Walls
- Solar Panel
- Spare Tire
- 14-Ply 235/85 Tire Upgrade
- 1-10k Drop-Leg Bolt On Jack
- 2-10K Drop-Leg Jacks
- Hydraulic Jack
- Hydraulic 7k Tradesman Jack
- Hydraulic Jack (2-10k) with Solar Charger
- Wireless Remote
- 3-Way Pump
- 24" Solid Side Extenstions
- 24" Mesh Side Extenstions
- Mud Flaps
- Cold Weather Harness
|
|
|
|
|
|
|
