**SF Bed May be Shown with Options. Click for larger image.

Smooth Rail FlatBed

If you are looking for a no frills heavy hauling truck bed for your farm or business, our SF model might be right up your alley. Full steel construction with integrated one piece tubular headache rack will give a lifetime of service. This bed has smooth steel sides and recessed stake pockets for a clean fit and finish and a diamond plate deck to help with your toughest of chores as well as standard LED lighting. Tapered corners and recessed gooseneck ball along with seven way plug and four way adapter are also standard to get you towing right out of the gate. The standard 2.5” receiver allows you to add a hitch for bumper pull cargo and a 2 5/16” gooseneck ball is standard in case you are hauling a heavyweight. Our receivers are lab tested and certified for 18,500 lbs bumper capacity and 30,000 lbs gooseneck capacity. Also standard is a 11 gauge full skirted rear bumper with a grip tape step. Add optional bale spikes for moving hay bales around the ranch or a gooseneck trough and 3/16” tread plate deck to tackle your toughest towing jobs.

SF

5.0 out of 5 (2 reviews)

Download Brochure Find a Dealer Request a Quote Order Parts

Barry C.
Stonyford, CA - 3/16/20

I needed a simple bed for general chores around the ranch. Daily feeding of 40-60 bales of hay. Hauling livestock from one property to another. Norstar hit that mark on the nose! I compared many of the most popular brands and models. The SF model quickly rose to the top. Not only is it well built, but the attention to detail is impeccable. My wife was impressed enough with the bed that I bought an ST model for hers.

Sam P.
Tiverton, RI - 4/24/20

Needed a flatbed and really though that you were the best bang for our buck but turns out it’s a really good body definitely will be getting more

See all reviews

Additional Photos

Structural steel frame
2" 18.5k Rated Bumper Receiver
30k Rated 2 5/16" Gooseneck Ball
4” Runner Channels (Adjustable on 84”, 8’6” Only)
Formed 3 x 3/16” Channel Cross Members
Steel Tube Head Rack with Cross Bars, Tail and Reverse Lights
Steel 1/8” Diamond Plate Floor
Built-In Gooseneck Well with Ball Mounted and Diamond Plate Lid
Angled Fuel Filler Neck
Skirted Rear Bumper with Anti-Slip Step
11 Ga Steel Construction

Receiver Hitch Ready
7 Way Plug in Gooseneck Box
Powder Coated Black
2.5” LED Reflective Marker Lights
4 Clear 6” Oval LED Reverse Lights
6 Red 6” Oval LED ST/TL/TN Lights
Single LED License Plate Light
All Lighting DOT Approved
Molded Sealed Harness with Resistors
4/5 & 7-Way Receiver Female Plug with Adapter
12 Ga Sides
11 Ga Bumper
Adjustable Mudflap Brackets

6" Channel Runners
Additional Cross Member
Additional Stake Pockets
Rear Stake Pockets w/ Rub Rail
Extend Head Rack From Standard Height
Spare Tire Mount on Head Rack
Fold Down Rails
Flush Mount 5k Tie Down
Chrome Accent Light Package
Dual LED Head Rack Work Lights

Single LED Head Rack Work Lights
Gooseneck Trough
Diamond Plate .188" Floor
No Gooseneck Well
Dove Tail
B & W Turnover Ball 2-5/16"
Bale Spike Option (Includes 3000PSI pump, (2)24" Tool Box, 4' Spikes, Cylinders, and Spike Compartment)

Apply Now

Norstar Bed Size Guide

Use this guide when ordering your Norstar truck bed. Please observe the measurements of each dimension and check before placing your order.

Length: Measurement from cab to end of frame.
Width: Measurement from outside of tire to outside of tire
CTA: Measurement from cab to axle
Runner: Measurement from outside of frame to outside of frame at the rear of the frame.
Models: ST, SF, SR, SD
Order Method: Model x Length x Width x CTA x Runner
Example: ST 9’4”L x 97”W x 60”CTA x 34” Runners (Add options) Note: 11’ long beds will have 84” CTA

Ford:

1998-Present

Dually – 8’6”L x 97”W x 56” CTA x 38” Runners
Single Wheel Long Wheel Base – 8’6”L x 84”W x 56”CTA x 38” Runner
Single Wheel Short Wheel Base – 84”L x 84”W x 40”CTA x 38” Runner
Cab & Chassis – 9’4”L x 92”W x 60”CTA x 34” Runners
F-350 takes a 92”W
F-450 & 550 are 94” & 97”W with Standard Headache Rack
2015 F650 Runners 34.5”

GM / Chevrolet:

2001-Present

Dually – 8’6”L x 97”W x 56”CTA x 42” Runners
Single Wheel Long Wheel Base – 8’6”L x 84”W x 56”CTA x 42” Runner
Single Wheel Short Wheel Base – 84”L x 84”W x 42”CTA x 42” Runner
Cab & Chassis – 9’ 4”L x 90” or 92”W x 60”CTA x 34” Runners
(Prior to 2000 measurements will be required)
4500 & 5500 is 94”W with 60” Headache Rack

Dodge:

2003-Present

2007 Cab and Chassis – 9’4”L x 94”W x 60”CTA x 34” Runner
Mega Cab – 84”L x 97”W x 40” CTA x 42” Runners
Mega Cab – 84”L x 84”W x 38” CTA x 42” Runners
Dually – 8’6”L x 97”W x 58”CTA x 42” Runners
Single Wheel Long Wheel Base – 8’6”L x 84”W x 58”CTA x 42” Runner
Single Wheel Short Wheel Base – 84”L x 84”W x 38”CTA x 42” Runner
2002 and earlier will have 56” CTA and 38” Runners on long bed

Plug N Play

Installation ADapters

The standard wire harness plug on Norstar beds will fit most GM vehicle factory harnesses. We also offer a variety of plug n play adapters that will vehicles year models by the following manufacturers:

1001010 WIRE HARNESS ADAPTER DODGE, CAB CHASS (YEAR 2000-CURRENT)
1001009 WIRE HARNESS ADAPTER FORD, CAB CHASS (YEAR 2000-CURRENT)
1001011 WIRE HARNESS ADAPTER FORD, PICK-UP BOX DELETE CURRENT (YEAR 2011-CURRENT)
1001013 WIRE HARNESS ADAPTER FORD, PICK-UP BOX DELETE w/ STOP ADAPTOR (YEAR 2011-CURRENT)
1001012 WIRE HARNESS ADAPTER GM, ADAPTER (YEAR 2015)
1001014 WIRE HARNESS ADAPTER GM, PICK-UP BOX DELETE (YEAR 2010-2014)