**SD Bed May be Shown with Options. Click for larger image.

Service Body Bed

The Norstar SD Service bed is perfect for the tradesman. Our Service Bed offers multiple standard tool boxes and many options for your on the go needs. This bed comes with 2 vertical cabinets, 2 angled boxes, 2 top boxes, and 2 rear underbody boxes plus a bonus locking rear shovel compartment for tons of storage. Multiple option choices allow you to build this bed to your industry. All doors are gas shock equipped and locking paddle latches are standard as well as a serviceable, tamper-resistant integrated door hinge system - new for 2020. Our 2.5" receiver allows you to add a hitch for bumper pull cargo and a 2 5/16" gooseneck ball is standard in case you are hauling a heavyweight. Our receivers are lab tested and certified for 18,500 lbs bumper capacity and 30,000 lbs gooseneck capacity. Standard adjustable galvanized tool trays with available cabinet tool drawers can add the finishing touch if you have a lot of parts or tools for your work load. Dual LED rear work lights and cast aluminum light housings as well as tail gate are standard features on the SD. These beds are a perfect complement for any single or dual wheel work truck with smooth 12 gauge sides, 11 gauge bumper and gloss black powder coating.



SD

4.4 out of 5 (5 reviews)








Shawn M.
Maxwell, NM - 8/27/20


LYLE M.
CUNNINGHAM, KY - 10/27/20


Kiel M.
Winnemucca , NV - 7/21/20

Have only had the bed for a few hours but all ready am more the pleased with the quality and options of this bed. The amount of storage is unbelievable and gaveling the lower sides is going to be so much better with my gooseneck trailer. And having tool and part storage is going to be amazing when out at the track. I couldn’t have designed a more versatile bed.








Additional Photos

SD Truck Bed Details


  • Steel Structural Frame
  • 2" 18.5k Rated Bumper Receiver
  • 30k Rated 2 5/16" Gooseneck Ball
  • 4" Runner Channels (Adjustable on 56" CTA Only)
  • Formed 3 x 3/16" Channel Cross Members
  • Steel Tube Head Rack w/ Cross Bars, Tail & Rev. Lights
  • Steel 1/8" Diamond Plate Floor
  • Tail Gate Fold-Down with Latch
  • Built in Gooseneck Well w/ Ball Mounted & Diam Plate Lid
  • Angled Fuel Filler Neck & DEF Ready
  • Skirted Rear Bumper w/ Anti Slip Step
  • Receiver Hitch Ready
  • 4 Tool Boxes w/ locking chrome paddle latch on Each Side (5 on 11'4")
  • Rear Lockable Compartment 27" x 38" - 78"
  • 12 Ga Steel Construction
  • Mudflap Brackets
  • 7 Way Plug in Gooseneck Box
  • LED Head Rack Work Light
  • Adjustable Smooth Flare Fenders
  • Powder Coated Black
  • 3/4" LED Marker Lights
  • 4 Clear 6" Oval LED Reverse Lights
  • 6 Red 6" Oval LED ST/TL/TN Lights
  • Single LED License Plate Light
  • Side & Rear Reflectors
  • LED Rear Work Light w/ Switch on Headrack
  • All Lighting DOT Approved
  • Molded Sealed Harness w/ Resistors
  • 4/5 & 7 Way Receiver Female Plug w/ ADAPTER
  • Adjustable Galvanized Shelves in Front Tool Boxes
  • Extend Head Rack From Standard Height
  • Smooth Stainless Steel Polished Fender
  • 7 Way Plug Installed in Gooseneck Box
  • Chrome Accent Light Package
  • Available Side Drawer Packages
  • Mudflap Mounting Brackets
  • Aluminum Diamond Plate Trim
  • B & W Turnover Ball 2-5/16"

Norstar Bed Size Guide


Use this guide when ordering your Norstar truck bed. Please observe the measurements of each dimension and check before placing your order.

  • Length: Measurement from cab to end of frame.
  • Width: Measurement from outside of tire to outside of tire
  • CTA: Measurement from cab to axle
  • Runner: Measurement from outside of frame to outside of frame at the rear of the frame.
  • Models: ST, SF, SR, SD
  • Order Method: Model x Length x Width x CTA x Runner
  • Example: ST 9’4”L x 97”W x 60”CTA x 34” Runners (Add options) Note: 11’ long beds will have 84” CTA

Ford:

1998-Present
  • Dually – 8’6”L x 97”W x 56” CTA x 38” Runners
  • Single Wheel Long Wheel Base – 8’6”L x 84”W x 56”CTA x 38” Runner
  • Single Wheel Short Wheel Base – 84”L x 84”W x 40”CTA x 38” Runner
  • Cab & Chassis – 9’4”L x 92”W x 60”CTA x 34” Runners
  • F-350 takes a 92”W
  • F-450 & 550 are 94” & 97”W with Standard Headache Rack
  • 2015 F650 Runners 34.5”

GM / Chevrolet:

2001-Present
  • Dually – 8’6”L x 97”W x 56”CTA x 42” Runners
  • Single Wheel Long Wheel Base – 8’6”L x 84”W x 56”CTA x 42” Runner
  • Single Wheel Short Wheel Base – 84”L x 84”W x 42”CTA x 42” Runner
  • Cab & Chassis – 9’ 4”L x 90” or 92”W x 60”CTA x 34” Runners
  • (Prior to 2000 measurements will be required)
  • 4500 & 5500 is 94”W with 60” Headache Rack

Dodge:

2003-Present
  • 2007 Cab and Chassis – 9’4”L x 94”W x 60”CTA x 34” Runner
  • Mega Cab – 84”L x 97”W x 40” CTA x 42” Runners
  • Mega Cab – 84”L x 84”W x 38” CTA x 42” Runners
  • Dually – 8’6”L x 97”W x 58”CTA x 42” Runners
  • Single Wheel Long Wheel Base – 8’6”L x 84”W x 58”CTA x 42” Runner
  • Single Wheel Short Wheel Base – 84”L x 84”W x 38”CTA x 42” Runner
  • 2002 and earlier will have 56” CTA and 38” Runners on long bed

Plug N Play

Installation ADapters

The standard wire harness plug on Norstar beds will fit most GM vehicle factory harnesses. We also offer a variety of plug n play adapters that will vehicles year models by the following manufacturers:

  • 1001010   WIRE HARNESS ADAPTER DODGE, CAB CHASS (YEAR 2000-CURRENT)
  • 1001009   WIRE HARNESS ADAPTER FORD, CAB CHASS (YEAR 2000-CURRENT)
  • 1001011   WIRE HARNESS ADAPTER FORD, PICK-UP BOX DELETE CURRENT (YEAR 2011-CURRENT)
  • 1001013   WIRE HARNESS ADAPTER FORD, PICK-UP BOX DELETE w/ STOP ADAPTOR (YEAR 2011-CURRENT)
  • 1001012   WIRE HARNESS ADAPTER GM, ADAPTER (YEAR 2015)
  • 1001014   WIRE HARNESS ADAPTER GM, PICK-UP BOX DELETE (YEAR 2010-2014)



Contact Us


Norstar Trailers, LLC
5500 FM 38 N
Brookston, TX, 75421
P:(903)784-8900
Email Us
sales@norstarcompany.com
| | | | | | |