Iron Bull Super Heavy Duty Dump Trailers

Iron Bull Super Heavy Duty Dump Trailers

Meet the Frankendump - a combination of a HD gooseneck trailer frame and a HD dump-truck inspired bed. This monster of a dump trailer comes equipped with tandem 10k dual wheel axles and up to 25 cubic yards of hauling capacity. With a 12" I-Beam neck and riser sitting on top of a 12" I-Beam frame this trailer is capable of heavy hauling. Upgrade to dual 15k axles and make sure you never have a job too big. The massive 10 ga 4' sidewalls have radiused bottoms to ensure all cargo is completely evacuated when the box reaches its near 45 degree dump angle. Each of these monster dump trailers are equipped with a two way combo gate and a massive 6x30 cylinder and scissor powered by a 12v remote operated hydraulic pump and InterState deep cycle battery. All wiring is in a sealed automotive grade harness and connected to USA made, lifetime recessed LEDs by TecNic. Sherwin-Williams Powdurda Powder coat gives each trailer a rugged finish with a showroom shine. Each Iron Bull Frankendump Trailer also comes equipped a locking front toolbox, an adjustable gooseneck coupler, dual 10k jacks and mud flaps. As always Iron Bulls are sitting on Dexter Nev-R-Adjust brake axles and roll down the road on factory equipped radial tires.

Additional Photos

 

Details


Available Sizes

Length

Frame/Neck

Deck Height

Axles

Weight*

16' 12" I-Beam Neck and Risers (19lb/ft) 33" 2 X 10,000 lb 6500
18' 12" I-Beam Neck and Risers (19lb/ft) 33" 2 X 10,000 lb 7500
20' 12" I-Beam Neck and Risers (19lb/ft) 33" 2 X 10,000 lb 8500
*Weight is approximate base model. Optional features will change
  • 12" I-Beam Neck and Risers (19lb/ft)
  • 4' Sidewalls with Board Holders
  • 2 5/16" Adjustable Coupler
  • 10 Gauge Radius Cornered Floor and Sidewalls
  • Structural 3" x 3/16" Channel Crossmembers
  • Two Way Gate
  • Locking Front Toolbox
  • Multi-Leaf Slipper Spring Suspension
  • 2 Cambered Dexter Nev-R-Adjust Brake Axles
  • 2 - 1ok Drop Leg Jacks
  • 630 Cylinder and Scissor Hoist
  • 4 Standard 3" D-Rings
  • 235/80R16 Radial Tires
  • Spare Tire Included
  • Sealed Lifetime LED Lighting
  • Molded Sealed Harness w/ Resistors
  • 7-Way Receiver Female Plug w/ Adaptor
  • Molded Sealed Harness w/ Resistors
  • 7-Way Receiver Female Plug w/ Adaptor
  • Sherwin Williams Powdura Powder Coat
  • 2 10k Axles
  • 2 12k Axles
  • 2 15k Axles
  • 14 Ply Tires
  • 12"-22 I-BEAM
  • Steel Floor
  • Dual 2 Speed Jacks
  • Additional D-Rings
  • Side Mount Tool Box
  • Hutch Suspension
  • Air Ride Suspension
  • Hydraulic Jacks


Contact Us


Norstar Company
5500 FM 38 N
Brookston, TX, 75421
P:(903)784-8900
Email Us
sales@norstarcompany.com
| | | | | | | |