14k 8” I-Beam Dump Trailer

For 2020 we have another new breed of dump trailer to the Iron Bull product line. Our DWB dump trailer brings 8” monoframe I-beam construction into the fold making the unit 2” shorter than our standard DTB. Built with the same rugged user in mind as our DTB model, the DWB comes in standard configurations only, but should have all the options to satisfy the needs of any serious dump user. The models include a beefy 8” I-beam frame, one-piece 7-gauge floors, 24" 10 gauge sides with 7 machined breaks that will not bend, bow, or buckle even under the most demanding conditions. An supersized locking front toolbox with divider ensures ample storage that will not interfere with your pump or battery. The front is capped off with a reinforced 2 5/16” coupler and standard 10k jack. A three way gate will ensure maximum flexibility for transport and dumping while the standard tarp will make sure you loads make it to their destination. D-rings, Y-hooks, and stake pockets are also thrown in for multiple tie-down options. This model also come equipped with slide in ramps, Dexter Nev-R-Adjust brake axles, radial tires, and a 5 amp wall charger. 516 cylinder scissor hoist give you maximum lift power when paired with KTI’s hydraulic remote operated pump. All lights are sealed lifetime LEDs and all trailers are equipped with sealed wire harnesses. These units are also backed by our industry-best IronClad warranty which covers every unit with three year structural, two year component warranty and two years free roadside assistance. So grab a bull by the horns and hook up to a DWB today.


5.0 out of 5 (6 reviews)

Cody W.
Clinton, WA - 9/4/20

Called Bruce at trailer station of mount vernon to enquire about a trailer. He was very quick to recommend the new iron bull for what im using it for which is landscaping and excavation I am very happy with my purchase.

TWIN FALLS, ID - 6/9/20

Michael T. S.
Bly, OR - 9/27/20

After having done research on several dump trailers I chose the Ironbull because I felt that it is a better built trailer than the others.

Additional Photos


Available Sizes



Deck Height


Cu yards


14' 83" 31" 24" 2.67 5,075
*Weight is approximate base model. Optional features will change
  • 8” I-Beam Frame & Tongue (10 lbs/ft )
  • 4” Tubing Bed Frame
  • 14,000 lb GVWR
  • One-Piece 7 Ga Floor
  • 24” 10 Gauge Steel Sides
  • Oversized Front Tool Box
  • 10k Drop-Leg Bolt-On Jack
  • 3-Way Rear Gate
  • Retractable Tarp System
  • Standard Slide-In Ramps
  • Tandem 7k Dexter Electric Nev-R-Adjust Brake Axles
  • Super Lube Hubs
  • 5 Amp 12-Volt Wall Charger
  • 235/80 R16 Radial Tires
  • Stake Pockets
  • Rear Support Stand Brackets
  • 5 Position 2 5/16” Coupler
  • 16” Steel Wheels
  • Scissor Lift with 516 Cylinder
  • 43 Degree Dump Angle
  • 3” Channel Crossmembers on 16” Centers
  • Hydraulic Pump
  • 12’ Corded Remote with LED Voltage Indicator
  • 4 Weld In D-Rings
  • Weld-On 3/8” Safety Chains
  • 14 Gauge Diamond Plate Fenders
  • Premium Sherwin Williams Powder Coated Black
  • Lifetime LED Stop, Signal, Marker, & License Plate Lights
  • 6 Leaf Spring Suspension
  • DOT Reflective Tape
  • Electric Breakaway Kit with Charger
  • All Lighting DOT Approved
  • Molded Sealed Harness
  • 7-Way Plug with Adapter
  • Third Spring Axle
  • Tandem 8k Axles
  • 102" Wide Deck
  • Drive Over Fenders
  • 14-Ply 235/85 Tire Upgrade
  • 2' Dove Tail
  • 3' Self Cleaning Dove
  • 5' Stand-Up Ramps
  • Rampage Ramps
  • Steel Floor
  • Rough Oak Floor
  • Winch Plate 1/2"
  • Fork Holders
  • 12" Crossmembers
  • 2-10K Jacks
  • Cold Weather Harness
  • Additional 3" D-Rings
  • Front Tool Box
  • Rear Supports
  • Weld on Spare Tire Mount
  • Bolt On Spare Tire Mount
  • Spare Tire
  • 10-Ply Black Wheel Mods

Contact Us

Norstar Company
5500 FM 38 N
Brookston, TX, 75421
Email Us
| | | | | | |