**SL Bed May be Shown with Options. Click for larger image.

Service Body Bed

The Norstar SL journeyman bed is a marriage between our two most popular models, the SD and ST. This bed offers the best of both worlds with multiple tool boxes, cabinets with adjustable galvanized shelves, a full-width 1/8” diamond plate deck, standard rub rails and stake pockets, LED work lights, 7 way receiver plus and gooseneck well plug. The standard 2.5” receiver allows you to add a hitch for bumper pull cargo and a 2 5/16” gooseneck ball is standard in case you are hauling a heavyweight. Our receivers are lab tested and certified for 18,500 lbs bumper capacity and 30,000 lbs gooseneck capacity. The SL is built with the versatility to handle whatever the job throws at you.

Additional Photos

SL Truck Bed Details


  • Structural steel frame
  • 2" 18.5k Rated Bumper Receiver
  • 30k Rated 2 5/16" Gooseneck Ball
  • 4” Runner Channels (Adjustable on 56” CTA Only)
  • Formed 3 x 3/16” Channel Cross Members
  • Steel Tube Head Rack w/ Cross Bars, Tail & Rev. Lights
  • Steel 1/8” Diamond Plate Floor
  • Built in Gooseneck Well w/ Ball Mounted & Diam Plate Lid
  • Angled Fuel Filler Neck & DEF Ready
  • Skirted Rear Bumper w/ Anti Slip Step
  • Receiver Hitch Ready
  • Mudflap Brackets
  • 7 Way Plug in Gooseneck Box
  • Adjustable Smooth Flare Fenders
  • Powder Coated Black
  • 3/4” LED Marker Lights
  • 4 Clear 6” Oval LED Reverse Lights
  • 6 Red 6” Oval LED ST/TL/TN Lights
  • Single LED License Plate Light
  • Side & Rear Reflectors
  • All Lighting DOT Approved
  • Molded Sealed Harness w/ Resistors
  • 4/5 & 7 Way Receiver Female Plug w/ ADAPTER
  • 12 Ga Sides
  • 11 Ga Bumper
  • Adjustable Shelf in Front Tool Boxes
  • Additional Cross Member
  • C-TECH 6 Drawers Tool Cabinet
  • Extend Head Rack From Standard Height
  • Smooth Stainless Steel Polished Fender
  • Tail Gate Fold Down w/ Latch
  • Flush Mount 5k Tie Down
  • 6" Channel Runners
  • Chrome Accent Light Package
  • Dual LED Head Rack Work Lights
  • Aluminum Diamond Plate Trim
  • Big Truck Package
  • Diamond Plate .188" Floor
  • Aluminum Cast Rear Light Housing
  • Aluminum Cast Rear License Plate Housing
  • Dual LED Rear Work Lights w/ Aluminum Housing
  • B & W Turnover Ball 2-5/16"

Norstar Bed Size Guide


Use this guide when ordering your Norstar truck bed. Please observe the measurements of each dimension and check before placing your order.

  • Length: Measurement from cab to end of frame.
  • Width: Measurement from outside of tire to outside of tire
  • CTA: Measurement from cab to axle
  • Runner: Measurement from outside of frame to outside of frame at the rear of the frame.
  • Models: ST, SF, SR, SD
  • Order Method: Model x Length x Width x CTA x Runner
  • Example: ST 9’4”L x 97”W x 60”CTA x 34” Runners (Add options) Note: 11’ long beds will have 84” CTA

Ford:

1998-Present
  • Dually – 8’6”L x 97”W x 56” CTA x 38” Runners
  • Single Wheel Long Wheel Base – 8’6”L x 84”W x 56”CTA x 38” Runner
  • Single Wheel Short Wheel Base – 84”L x 84”W x 40”CTA x 38” Runner
  • Cab & Chassis – 9’4”L x 92”W x 60”CTA x 34” Runners
  • F-350 takes a 92”W
  • F-450 & 550 are 94” & 97”W with Standard Headache Rack
  • 2015 F650 Runners 34.5”

GM / Chevrolet:

2001-Present
  • Dually – 8’6”L x 97”W x 56”CTA x 42” Runners
  • Single Wheel Long Wheel Base – 8’6”L x 84”W x 56”CTA x 42” Runner
  • Single Wheel Short Wheel Base – 84”L x 84”W x 42”CTA x 42” Runner
  • Cab & Chassis – 9’ 4”L x 90” or 92”W x 60”CTA x 34” Runners
  • (Prior to 2000 measurements will be required)
  • 4500 & 5500 is 94”W with 60” Headache Rack

Dodge:

2003-Present
  • 2007 Cab and Chassis – 9’4”L x 94”W x 60”CTA x 34” Runner
  • Mega Cab – 84”L x 97”W x 40” CTA x 42” Runners
  • Mega Cab – 84”L x 84”W x 38” CTA x 42” Runners
  • Dually – 8’6”L x 97”W x 58”CTA x 42” Runners
  • Single Wheel Long Wheel Base – 8’6”L x 84”W x 58”CTA x 42” Runner
  • Single Wheel Short Wheel Base – 84”L x 84”W x 38”CTA x 42” Runner
  • 2002 and earlier will have 56” CTA and 38” Runners on long bed

Plug N Play

Installation ADapters

The standard wire harness plug on Norstar beds will fit most GM vehicle factory harnesses. We also offer a variety of plug n play adapters that will vehicles year models by the following manufacturers:

  • 1001010   WIRE HARNESS ADAPTER DODGE, CAB CHASS (YEAR 2000-CURRENT)
  • 1001009   WIRE HARNESS ADAPTER FORD, CAB CHASS (YEAR 2000-CURRENT)
  • 1001011   WIRE HARNESS ADAPTER FORD, PICK-UP BOX DELETE CURRENT (YEAR 2011-CURRENT)
  • 1001013   WIRE HARNESS ADAPTER FORD, PICK-UP BOX DELETE w/ STOP ADAPTOR (YEAR 2011-CURRENT)
  • 1001012   WIRE HARNESS ADAPTER GM, ADAPTER (YEAR 2015)
  • 1001014   WIRE HARNESS ADAPTER GM, PICK-UP BOX DELETE (YEAR 2010-2014)



Contact Us


Norstar Company
5500 FM 38 N
Brookston, TX, 75421
P:(903)784-8900
Email Us
sales@norstarcompany.com
| | | | | | |