Iron Bull Low-Pro Tilt Deck Series Trailers

Go full tilt with your trailering. Iron Bull Gravity Tilt decks offer a great alternative to ramps, steep loading angles and possible hang up points of traditional flat deck units. 14,000 lbs of Gross Vehicle Weight Rating ensure you have enough capacity for your heaviest loads and expert craftsmanship combined with top-tier components ensure you have an effortless tow. It's a great fit for work and play. Dexter Nev-R-Adjust brake axles and radial tires provide a solid foundation for each Iron Bull tilt trailer and ample grip for stopping power. Sherwin-Williams Powdurda Powder coat gives each trailer a rugged finish with a showroom shine. USA made, lifetime recessed LEDs are provided by TecNic lighting. Each Iron Bull Trailer also comes equipped with a stake pockets, pipe spools and rub rail, removable diamond plate fenders, and adjustable coupler. Our 83" wide 14k low-pro bumper pull is by far our most popular tilt deck model. With two 7k Dexter Axles and tons of standard features, this model is a perfect fit for work or play.


4.9 out of 5 (10 reviews)

andre s.
simi valley, CA - 6/23/21

Earl J.
Lincoln, NE - 10/13/20

personally i think its one of the best looking trailers ive seen. ive used it to move our skid loaders around and it pulls nicely and the trailer brakes work well.. so far its been a nice unit and have had a few compliments on it. the tilt portion is really nice and i like that the lock unlock is on one side unlike my last trailer.

Adam C.
Poughquag, NY - 11/1/19

I was looking for a gravity tilt trailer that I could use to move my skid steer and mini excavator on. I also planned on installing a winch to use it to move vehicles. I chose the Ironbull because it could perform all of these tasks. The Carolina trailers tilt decks were far too short to load a truck on, and the Indiana brands the fixed deck was too small to fit additional skid steer implements. This trailer does it all. Has the stop valve and torsion axles which make it stand out even further from the competition. So far I am very pleased with the performance of this trailer and I do recommend it.

Additional Photos


Available Sizes



Deck Height

Stationary Deck


18' 83" 20" 2' 2698
20' 83" 20" 4' 2960
*Weight is approximate base model. Optional features will change
  • 6" Channel Tongue (8.2 lbs/ft)
  • 2 - 5200 or 7000 Lb Dexter Torsion Axles
  • 2 5/16" Adjustable Coupler
  • Formed 3 x 3/16" Channel Cross Members
  • 20" Deck Height
  • 11 Degree Loading Angle
  • Knife Edge Tail
  • Removable Diamond Plate Fenders
  • Rub Rail and Stake Pockets
  • 10k Drop-Leg Jack
  • 4 Standard 3" D-Rings
  • Radial Tires
  • E-Z Lube Hubs
  • 3" x 10" Cylinder with 1.5" Shaft
  • Cambered Dexter Nevr-R-Adjust Torsion Axles
  • Multi-leaf Slipper Spring Suspension
  • Treated Pine Floor
  • Lifetime LED Lighting
  • All Lighting DOT Approved
  • Molded Sealed Harness with Resistors
  • 7-Way Receiver Female Plug with Adapter
  • Sherwin-Williams Powdura Powder Coat
  • Power Up/Power Down
  • Full Deck Tilt
  • 102" Wide Deck
  • Third Torsion Axle
  • Drive Over Fenders
  • 12" Crossmembers
  • 14-Ply 235/85 Tire Upgrade
  • 2-10K Jacks
  • Rough Oak Axles
  • Steel Floor
  • LED Backup Lights
  • Cold Weather Harness
  • Additional D-Rings
  • Front Tool Box
  • Weld On Spare Tire Mount
  • Bolt On Spare Tire Mount
  • 1/2" Winch Plate
  • Spare Tire

Contact Us

Norstar Trailers, LLC
5500 FM 38 N
Brookston, TX, 75421
Email Us
| | | | | | |